ROLL, STATFREE DLR, RUBBER GREEN, 2 LAYER, 2MM, 1.22MX10M

• Two-layer rubber, static dissipative coloured top and more conductive black bottom
• Solder iron resistant and withstands most chemicals
• Ground snap and ground cord not included – see Worksurface Grounding
• Easy to clean
• Low reflecting
• Ideal mat to use with constant monitors
• Rp-p Top Colour Layer: 1 x 10⁶ to < 1 x 10⁹ ohms meets EN 61340-5-1

Specifications:
Rp-p Top Colour Layer: 1 x 10⁶ to < 1 x 10⁹ ohms meets EN 61340-5-1
Rp-p Bottom Black Layer: < 1 x 10⁶ ohms meets EN 61340-5-1
Rg: 1 x 10⁶ to < 1 x 10⁸ ohms meets EN 61340-5-1
Abrasion (ISO 4649, method A): less than 200E3 mm
Chemical (EN 423): resistant to chemical agents normally used for maintenance
Thickness: 2mm (±5%)Hardness (ISO 7619): 75 ± 5 shore A
Weight: 2.7 kg/m2
Colours: light blue, light grey, beige, green

Per EN 61340-5-1 Edition 1.0 2007-08 “Table 3 EPA requirements the limit for Working surfaces, storage racks and trolleys is <1x10⁹ ohms tested per IEC 61340-2-3” and per NOTE 6 “In situations where charged device model (CDM) damage is a concern a lower point to point resistance limit of 1x10⁴ ohms is recommended.”

“The most important functional consideration for work surfaces is the resistance from the top of the surface to the groundable point [Rgp]. This establishes the resistance of the primary path to ground for items placed on the surface. IEC 61340-5-1 has set a resistance to ground range for work surfaces of less than 1,0 x 10⁹ ohms.” [CLC/TR 61340-5-2:2008 User guide clause 4.7.1.2.5 Electrical considerations – Work Surfaces]

Due to variations in computer monitor displays, color shown may not be exact. For true accurate color, please request an actual sample.